Polymer spacers that lift rooftop and patio tiles to a uniform height, so water drains and the waterproofing layer is protected.
- Raise tiles for drainage
- Protect waterproofing layers
- Heights of 13 and 19 mm
Brands we supply
Brand portfolio
GSPF
GSPF, short for Global Source Plastic Factory L.L.C., is a UAE-based manufacturer of polymer components for the construction, precast and industrial sectors. It operates from Umm Al Quwain and supplies customers across the GCC, with select international supply depending on logistics and order requirements.
About GSPF and its applications
GSPF works with in-house design, tooling, production and quality assurance, and uses polymers including PE, PP, PVC and HDPE, along with specialty materials. Its range covers components for precast production, construction and industrial use.
Product Areas
- Concrete reinforcement and structural spacers: clip spacers, heavy-duty clip spacers, wheel spacers, pile cage spacers, tower spacers and plastic rebar cones, which hold reinforcement at the specified cover.
- Levelling and adjustment solutions: shim pads, U-shim pads and roof tile spacers for levelling, packing and raised paving.
- Precast protection and finishing components: hollow core caps, corner chamfers, rebar safety caps and lifting socket caps.
- Fastening, anchoring and structural accessories: adhesive anchors and nailing plates.
- Industrial bonding and fabrication materials: thermoplastic welding rods.
- Custom and on-request manufacturing: plastic components made to client specifications.
Applications
GSPF components are used in:
- Precast concrete production: cover control, levelling, slab-end protection and edge detailing.
- In-situ and infrastructure construction: reinforcement spacing for slabs, beams, foundations and piling cages.
- Site work: protecting exposed rebar ends and fixing with epoxy anchors.
- Plastic fabrication and repair: welding rods for tanks, piping and components.
- Bespoke and OEM parts: custom-made polymer components.
Each GSPF product page sets out the sizes, product codes and pack quantities for that product.
GSPF Products from Global Source Middle East
Global Source Middle East supplies GSPF spacers, precast accessories, anchors, welding rods and custom-manufactured components to contractors, precast producers and project engineers in the UAE.
Contact Global Source Middle East in Deira, Dubai, for quotations and orders.
Explore the portfolio
13–18 of 18 products
Square polymer shim pads for packing, levelling and aligning precast concrete elements during erection.
- Polymer pads for precast levelling
- Four thicknesses from 2 to 10 mm
- Square 70 x 70 mm pads
Four-legged polymer spacers that give multi-directional support to reinforcement and reduce the amount of metal tying.
- Four-legged support for rebar
- Horizontal and vertical reinforcement
- Cover sizes from 20 to 60 mm
Open-sided U-shaped packing shims that slot in around bolts and plates, for fast levelling in precast and steel erection.
- Open U shape fits around bolts
- Six thicknesses from 1 to 10 mm
- For precast and steel erection
Extruded thermoplastic welding rods in a range of polymers, diameters and profiles for plastic fabrication, repair and custom manufacturing.
- Thermoplastic rods for plastic welding
- Round and triangular profiles
- PP and PE rods, 3 to 5 mm
Lightweight wheel spacers with a locking hub and open spokes, made for vertical reinforcement and clean formwork finishes.
- Wheel spacers for vertical reinforcement
- Open spokes allow concrete flow
- Seven covers from 20 to 75 mm
A styrene-free, two-component pure epoxy anchoring system for fixings in concrete, stone and masonry.
- Two-component pure epoxy, 3:1
- Styrene-free and odourless
- Concrete, stone and masonry
Polymer clip spacers that hold horizontal reinforcement at a defined concrete cover, specified to German Performance Class L2 (1 kN).
- Clip-fit support for horizontal rebar
- Cover sizes from 20 to 75 mm
- German performance class L2 (1 kN)
A manufacturing service for plastic components made to your specification, from concept and tooling through to production and finishing.
- Custom plastic components to specification
- Design, tooling and production support
- Prototypes to high-volume runs
Reinforced polymer clip spacers for large-diameter bars and heavily reinforced elements, with cover up to 100 mm.
- Clip spacers for bars up to 32 mm
- Cover sizes from 25 to 100 mm
- Reinforced, impact-resistant polymer
Pile cage spacers with a reinforced closed wheel, made for deep piling where the spacer must hold its shape under heavy loads.
- Closed-wheel spacers for high-load piles
- Resists deformation under load
- Bars of 8 to 18 mm
Polymer end caps that seal the open cores of hollow core slabs during grouting, storage and transport.
- End caps for hollow core slabs
- Keep grout out of the cores
- Six slab sizes, 150 to 500 mm
Polymer recess closures that seal lifting socket recesses in precast elements and protect the sockets from dirt, water and corrosion.
- Plastic caps that seal socket recesses
- Protect socket threads from corrosion
- Seven sizes from 12 to 42 mm
Colour-coded plates that hold lifting sockets in position on formwork while precast concrete is poured and cured.
- Holds lifting sockets on formwork
- Colour-coded by size
- Plates for 12 to 42 mm sockets
Heavy-duty wheel spacers that keep concrete cover on pile reinforcement cages as they are lowered into the bore.
- Wheel spacers for pile cages
- Fit helical and main bars
- Cover of 75 and 100 mm
Moulded polymer chamfer profiles that form clean, consistent chamfered edges and groove lines in precast and cast-in-situ concrete.
- Forms clean chamfered concrete edges
- Four sizes from 10 to 25 mm
- Supplied in 2 m lengths
Precision-moulded cones that form clean, uniform recesses in concrete for grouting and can be extracted after the formwork is removed.
- Cones that form grouting recesses
- Easy extraction after formwork removal
- Listed for 20, 22 and 26 mm
Reusable polymer mushroom caps that cover exposed rebar ends to reduce the risk of contact injuries on site.
- Mushroom caps for exposed rebar ends
- Two sizes covering 8 to 32 mm
- Bright colour options
No products match your selection.
Try another product name or clear the filters to browse the full selection.
Plan your purchase
Discuss your requirements
Contact Global Source Middle East about GSPF products or request a quotation for your requirements.