Skip to content
GSPF Roof Tile Spacers for Raised Rooftop and Patio Paving, image 1 of 4

1 / 4

GSPF

GSPF Roof Tile Spacers for Raised Rooftop and Patio Paving

Polymer spacers that lift rooftop and patio tiles to a uniform height, so water drains and the waterproofing layer is protected.

Brand
GSPF
Type
Individual product
  • Raises tiles and slabs to a uniform height
  • Promotes drainage beneath the surface
  • Helps protect waterproofing layers from standing water
  • Lets air move beneath the tile surface
  • Heights of 13 and 19 mm
  • Packed 100 or 150 pieces

Description

GSPF Roof Tile Spacers are polymer spacers placed under tiles or stone slabs on rooftops, terraces and patios. They lift the surface material to a consistent height and keep a gap below it.

That gap lets water run off and air circulate, which reduces the chance of water collecting on the waterproofing layer underneath. The polymer is made for long-term outdoor exposure.

Key Features and Benefits

  1. Uniform elevation

    Spacers hold tiles or slabs at a consistent height across the surface.

  2. Drainage and airflow

    The gap beneath the tiles supports water runoff and airflow, and lowers stress on the surface.

  3. Waterproofing protection

    Avoiding water accumulation helps protect the waterproofing system below.

  4. Outdoor-ready polymer

    The material is durable for long-term outdoor exposure and light to handle.

Applications and Use Cases

Roof Tile Spacers are used for:

  • Rooftop tile and slab installations that need controlled spacing
  • Patios, terraces and balconies with tiled or stone finishes
  • Areas that need better drainage and airflow beneath the surface
  • Installations where the waterproofing membrane must be protected
  • Commercial and residential rooftop landscaping or hardscaping

Technical Specifications

Roof Tile Spacers technical data
Product CodeHeight (mm)Dia (mm)Packing (pcs)
GRS1313150150
GSR1919150100

Request a quotation

Buy Roof Tile Spacers from Global Source Middle East

On a roof terrace, the finished tiles are only as durable as the drainage beneath them. Global Source Middle East supplies GSPF Roof Tile Spacers to waterproofing and paving contractors in the UAE. Send the height and the area to be covered, and we will quote the product code and pack quantity.

Frequently Asked Questions

What do Roof Tile Spacers do?

They raise tiles or slabs to a uniform height, which promotes drainage and airflow and helps protect the waterproofing layer from standing water.

Which heights are available?

13 mm and 19 mm.

What diameter are they?

Both heights have a diameter of 150 mm.

Related products

  • GSPF Adhesive Anchors: Two-Component Pure Epoxy Anchoring System

    Precast & Construction Accessories

    A styrene-free, two-component pure epoxy anchoring system for fixings in concrete, stone and masonry.

    • Two-component pure epoxy, 3:1
    • Styrene-free and odourless
    • Concrete, stone and masonry
    View Product
  • GSPF Custom & On-Request Plastic Component Manufacturing

    Precast & Construction Accessories

    A manufacturing service for plastic components made to your specification, from concept and tooling through to production and finishing.

    • Custom plastic components to specification
    • Design, tooling and production support
    • Prototypes to high-volume runs
    View Product
  • GSPF Hollow Core Caps (End Caps) for Hollow Core Slabs

    Precast & Construction Accessories

    Polymer end caps that seal the open cores of hollow core slabs during grouting, storage and transport.

    • End caps for hollow core slabs
    • Keep grout out of the cores
    • Six slab sizes, 150 to 500 mm
    View Product
  • GSPF Plastic Corner Chamfers for Concrete Edges, 10 to 25 mm

    Precast & Construction Accessories

    Moulded polymer chamfer profiles that form clean, consistent chamfered edges and groove lines in precast and cast-in-situ concrete.

    • Forms clean chamfered concrete edges
    • Four sizes from 10 to 25 mm
    • Supplied in 2 m lengths
    View Product
  • GSPF Plastic Rebar Cones for Clean Grouting Recesses

    Precast & Construction Accessories

    Precision-moulded cones that form clean, uniform recesses in concrete for grouting and can be extracted after the formwork is removed.

    • Cones that form grouting recesses
    • Easy extraction after formwork removal
    • Listed for 20, 22 and 26 mm
    View Product
  • GSPF Shim Pads for Levelling and Packing Precast Elements

    Precast & Construction Accessories

    Square polymer shim pads for packing, levelling and aligning precast concrete elements during erection.

    • Polymer pads for precast levelling
    • Four thicknesses from 2 to 10 mm
    • Square 70 x 70 mm pads
    View Product
  • GSPF U-Shim Pads (Packing Shims) for Precast and Steel Erection

    Precast & Construction Accessories

    Open-sided U-shaped packing shims that slot in around bolts and plates, for fast levelling in precast and steel erection.

    • Open U shape fits around bolts
    • Six thicknesses from 1 to 10 mm
    • For precast and steel erection
    View Product
  • G-Lift C-Channels & T-Bolts, M10 to M20

    Precast & Construction Accessories

    Cast-in anchor channels with T-bolts for adjustable fixings that avoid drilling into hardened concrete.

    • Five C-channel profile sizes
    • T-bolts M10 to M20
    • Cast-in, no on-site drilling
    View Product
  • G-Lift Plastic and Steel Chamfer Strips, 5 to 30 mm

    Chamfers

    G-Lift

    Precast & Construction Accessories

    Plastic and steel chamfer strips for forming chamfered concrete edges and false joints, 5 to 30 mm.

    • Plastic and steel chamfer strips
    • Sizes 5 to 30 mm
    • All strips 2 m long
    View Product
  • G-Lift Connecting Loops, 80 to 140 mm

    Precast & Construction Accessories

    Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.

    • Single wire loop, 1770 MPa
    • Sizes from 80 to 140 mm
    • Pop-up loop, no re-bending
    View Product
  • G-Lift Connector Pins for Precast Sandwich Panels

    Precast & Construction Accessories

    High-strength steel connector pins for joining the layers of precast sandwich panels.

    • For precast sandwich panels
    • Four sizes, 150 to 250 mm
    • High-strength steel pins
    View Product
  • G-Lift Galvanized Corrugated Pipes, 40 to 150 mm

    Precast & Construction Accessories

    Galvanized steel corrugated pipes in diameters from 40 to 150 mm for post-tensioning ducts, voids and service penetrations.

    • Galvanized steel, 40 to 150 mm
    • Hot-dip galvanized coating
    • Bendable, cuttable, semi-rigid
    View Product

View Precast & Construction Accessories

Featured products

  • Carbodiam Diamond Blades for Hand-Held, Floor, Wall and Table SawsProduct Range

    Diamond & Cutting Tools

    Diamond saw blades for every class of cutting machine, specified by material and machine power for reinforced concrete, asphalt, masonry, stone, tiles and precast.

    • Blades for hand-held, floor and wall saws
    • Concrete, asphalt, stone and tile cutting
    • Specified by machine power and material
    View Product
  • G-Lift Fixing Sockets, M8 to M24

    Precast Lifting Systems

    Flat-end fixing sockets with a cross-hole, in six metric sizes for lightweight precast elements and wooden formwork.

    • Thread sizes M8 to M24
    • Crimped flat end with cross-hole
    • SWL 200 to 1600 kg
    View Product
  • G-Lift Connecting Loops, 80 to 140 mm

    Precast & Construction Accessories

    Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.

    • Single wire loop, 1770 MPa
    • Sizes from 80 to 140 mm
    • Pop-up loop, no re-bending
    View Product
  • GSPF Clip Spacers for Rebar Cover, 20 to 75 mm

    Rebar Spacers & Accessories

    Polymer clip spacers that hold horizontal reinforcement at a defined concrete cover, specified to German Performance Class L2 (1 kN).

    • Clip-fit support for horizontal rebar
    • Cover sizes from 20 to 75 mm
    • German performance class L2 (1 kN)
    View Product
  • Heller Bionic Pro SDS-plus Hammer Drill Bit for Concrete and Reinforcement

    Drill Bits & Chisels

    An SDS-plus dual-cutter hammer drill bit for concrete and reinforcement steel, with a patented drill head and a helix built to carry drilling dust out of the hole.

    • Dual-cutter for concrete and rebar
    • Twinmax 3D helix clears drilling dust
    • Sizes from 4 to 26 mm
    View Product
  • Heller SDS-plus and SDS-max Chisels for Concrete, Masonry and StoneProduct Range

    Drill Bits & Chisels

    Chisels for SDS rotary hammers, in the shapes and sizes that demolition, chasing and refurbishment work in concrete, masonry and stone call for.

    • SDS-plus and SDS-max chisels
    • Types for demolition, chasing and tiles
    • Tool steel chisels, can be reground
    View Product
  • Linktech ST-GS-028 Steel Single Step with Zinc Coating

    ST-GS-028

    Linktech

    Precast & Construction Accessories

    Zinc-coated steel single step with a 12 mm core and a 145 mm dowel distance.

    • Zinc-coated steel single step
    • 12 mm core, 0.800 kg
    • Dowel distance 145 mm
    View Product
  • PFS PolyControl Plus Electrofusion Control Unit

    Pipe Welding Equipment

    Inverter electrofusion control unit with an actively cooled aluminium housing, intended for demanding large-diameter couplers.

    • Inverter electrofusion control unit
    • 8–48 V DC output
    • Couplers up to 1200 mm and above
    View Product
  • Väli VPWS 800 Automatic Butt Fusion Welding Machine, 450–800 mm

    Pipe Welding Equipment

    Automatic butt fusion machine for pipe from 450 to 800 mm, with a 0–16 MPa hydraulic range and an integrated 0.5 kW crane.

    • Automatic butt fusion, 450–800 mm
    • Pressure range 0–16 MPa
    • Integrated crane, 1360 kg
    View Product
  • Väli Electric Pipe Cutter Pro, 2300 W, 75–400 mm

    Pipe Welding Equipment

    A 2300 W electric pipe cutter for pipe from 75 to 400 mm, with variable speed and a tool-free blade lock.

    • Cuts pipe 75 to 400 mm
    • 2300 W, 0–2900 r/min
    • One-click blade lock
    View Product
  • Weldy booster EX3 Hand Extrusion Welder, 3000 W

    Plastic Welding Equipment

    A 3000 W hand extruder for PE and PP welding in civil engineering, tank fabrication and membrane work.

    • Longer-body extruder for civil engineering
    • Welds HDPE, LDPE, LLDPE and PP
    • Overlap welding shoe included
    View Product
  • Weldy miniwelder tex2 Hot Wedge Welder for Tarpaulins and Thin Membranes

    Plastic Welding Equipment

    A compact hot wedge welding machine for clean, consistent overlap seams in tarpaulins, banners, awnings and other thin membranes.

    • Hot wedge welder for 0.1–1 mm membranes
    • Tarpaulins, banners, awnings and covers
    • 3.6 kg, up to 7.5 m/min
    View Product

All products