Heller Bionic Pro SDS-plus Hammer Drill Bit for Concrete and Reinforcement
An SDS-plus dual-cutter hammer drill bit for concrete and reinforcement steel, with a patented drill head and a helix built to carry drilling dust out of the hole.
- Brand
- Heller
- Category
- Drill Bits & Chisels
- Model
- Bionic Pro SDS-plus
- Type
- Individual product
- Dual-cutter head for concrete and reinforcement steel
- Patented drill head with recessed carbide tip
- Twinmax 3D helix for effective dust transport
- Double centring tip for accurate positioning
- SDS-plus shank for hammer drilling
- Diameters from 4 to 26 mm
- Total lengths from 110 to 1400 mm
Description
The Heller Bionic Pro SDS-plus is a hammer drill bit for general professional drilling in concrete, including concrete with reinforcement. It is a dual-cutter, with an optimised carbide cutting edge on a patented drill head. A recessed carbide tip helps the head cope with reinforcement steel and keeps drilling progress moving.
The bit has an SDS-plus shank and is used in hammer drilling mode with SDS-plus rotary hammers. It is offered in a wide size range, from 4 mm for small fixings up to 26 mm for larger holes, and in working lengths from short stubs to bits of well over a metre for deep holes.
Within Heller’s range, the Bionic Pro SDS-plus is the general-purpose dual-cutter. Where a multi-cutter head is wanted for reinforced concrete, see the Trijet Ultimate SDS-plus. Where drilling dust must be extracted at the drill head, see the Duster Expert SDS-plus. For drilling through heavy reinforcement steel, see the Rebar Breaker SDS-plus.
Key Features and Benefits
Dual-cutter head for concrete and rebar
The optimised carbide cutting edge is designed for drilling progress, and the recessed carbide tip protects the head when the bit meets reinforcement steel. It is suited to the base materials listed under Applications.
Twinmax 3D helix
The Twinmax 3D helix is designed to carry drilling dust out of the hole effectively, even in deep holes, which reduces the risk of dust blowing back at the operator.
Accurate starts and clean edges
A double centring tip makes the bit easy to position and helps avoid spalling at the hole entry, even after many holes.
Lower vibration
The helix design is intended to reduce vibration, which lessens the load on the user during repeated drilling.
Applications and Use Cases
The Bionic Pro SDS-plus is suited to drilling in:
- concrete and reinforced concrete
- aerated concrete and aerated and porous concrete
- brickwork, brick and sand lime brick
Typical uses include holes for anchors and fixings, services penetrations and general construction drilling with an SDS-plus rotary hammer.
Technical Specifications
- Shank
- SDS-plus
- Drilling method
- Hammer drilling
- Type
- Dual-cutter hammer drill bit
- Diameter range
- 4–26 mm
- Working length range
- 50–1350 mm
- Total length range
- 110–1400 mm
- Cutting head
- Patented head with recessed carbide tip and double centring tip
- Helix
- Twinmax 3D
- Pack formats
- Single bits, multipacks and sets
The ranges above show the limits of the size range. They do not mean every diameter is available in every length: diameters and lengths are offered in selected combinations. For example, the smallest diameters are made in shorter lengths, and the longest lengths are made in the mid-range diameters.
Request a quotation
Buy Bionic Pro SDS-plus from Global Source Middle East
Contractors who drill all day in concrete want one bit they can rely on for most holes: through plain concrete, into reinforced sections, and in brickwork. The Bionic Pro SDS-plus is Heller’s general-purpose answer, and its long size range means anchor holes, services runs and deep penetrations can all be drilled with the same bit family.
Global Source Middle East supplies the Bionic Pro SDS-plus to contractors, installers and procurement teams in the UAE, as single bits, multipacks or sets. Send the diameters, lengths and quantities your teams use for a quotation.
Frequently Asked Questions
What is the difference between the Bionic Pro SDS-plus and the Trijet Ultimate SDS-plus?
Both are SDS-plus hammer drill bits for concrete and reinforcement. The Bionic Pro is a dual-cutter. The Trijet Ultimate is Heller’s multi-cutter, built around the patented Trijet tip, and is positioned as its premium bit for reinforced concrete.
Is the Bionic Pro SDS-plus an extraction drill bit?
No. It clears dust through its helix in the usual way. For drilling with dust extraction at the drill head, Heller offers the Duster Expert.
What shank and machine does it need?
It has an SDS-plus shank and is used in the hammer drilling mode of an SDS-plus rotary hammer.
Which sizes are available?
Diameters run from 4 to 26 mm, with total lengths from 110 to 1400 mm. Not every diameter is made in every length, so include the diameter and length you need when you enquire.
