G-Lift Connecting Loops, 80 to 140 mm
Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.
- Brand
- G-Lift
- Type
- Individual product
- Wire rope loop of 1770 MPa
- Four sizes, 80 to 140 mm
- Pops up automatically after casting
- Pre-punched nail holes for formwork
- Galvanized steel casing
- Tear-off tape releases the loop
Description
G-Lift Connecting Loops are single wire loops that connect precast wall panels to each other or to structural columns. The loop is made of 1770 MPa zinc-plated wire rope and sits in a galvanized steel casing.
The loop pops up after casting, so it does not need to be bent out by hand. Four sizes from 80 to 140 mm are listed.
Key Features and Benefits
Galvanized wire loop
The loop is zinc-plated wire rope with a tensile strength of 1770 MPa.
Automatic pop-up
The loop rises automatically after casting, which removes manual rebending.
Pre-punched nail holes
Nail holes allow quick fixing to the formwork.
Galvanized steel casing
The casing gives stability during fixing and concreting.
Tear-off tape
Tear-off tape releases the loop without tools.
Applications and Use Cases
Connecting Loops are used for:
- Wall-to-wall butt junctions in precast panels
- Wall-to-column connections
- Connections using a ribbed steel bar through the wire rope loop
Technical Specifications
| Product Code | Size (mm) | Wire Size (mm) |
|---|---|---|
| GLCL080 | 80 | 6 |
| GLCL100 | 100 | 6 |
| GLCL120 | 120 | 6 |
| GLCL140 | 140 | 9 |
The 1770 MPa figure is the tensile strength of the wire. Connection capacity follows the panel joint design.
Request a quotation
Buy Connecting Loops from Global Source Middle East
Connection loops are chosen to suit the panel joint and the design of the connection. Global Source Middle East supplies G-Lift Connecting Loops to precast producers and contractors in the UAE. Send the joint type, loop sizes and quantities for a quotation.
Frequently Asked Questions
Which sizes are available?
80, 100, 120 and 140 mm. The 140 mm loop uses 9 mm wire; the others use 6 mm.
Does the loop need to be bent out?
No. It pops up automatically after casting.
What strength is the wire?
The wire has a tensile strength of 1770 MPa. The capacity of the connection comes from the panel joint design.
