GSPF Thermoplastic Welding Rods for Plastic Fabrication and Repair

A 3000 W hand extruder for PE and PP welding in civil engineering, tank fabrication and membrane work.

• Longer-body extruder for civil engineering
• Welds HDPE, LDPE, LLDPE and PP
• Overlap welding shoe included

A five-piece overlap welding kit built around the 1600 W energy HT1600 heat gun, for welding PVC and TPO membranes and technical textiles.

• Five-piece overlap welding kit
• Two wide slot nozzles and roller
• Stepless 40–700 °C, 1600 W

Handheld extrusion welders for strong, high-volume PE and PP welds in tank fabrication, pipework, membrane lining and water infrastructure.

• Hand extruders for PE and PP
• High-volume welds with welding rod
• Interchangeable welding shoes by seam type

Hot wedge welders and hand extruders for joining thermoplastic geomembranes in lining, containment and waterproofing projects.

• Hot wedge welders for geomembrane seams
• Hand extruders for liner detailing
• Testable seams for lining quality control

Handheld hot air tools for welding, shrinking, forming and drying thermoplastics, built for everyday use on site and in the workshop.

• Handheld hot air for welding and shrinking
• Stepless and digital temperature control options
• Interchangeable nozzles for each hot air task

A slim split-type hot air tool with an external air supply, for welding, drying and shrinking in spaces too tight for a conventional heat gun.

• Slim handle for tight working spaces
• External air supply via 1.5 m hose
• Adjustable temperature from 20–600 °C

A compact hot wedge welding machine for clean, consistent overlap seams in tarpaulins, banners, awnings and other thin membranes.

• Hot wedge welder for 0.1–1 mm membranes
• Tarpaulins, banners, awnings and covers
• 3.6 kg, up to 7.5 m/min

Automatic welders and hot air tools for joining thermoplastic roofing membranes on flat and pitched roofs.

• Automatic welders for flat and pitched roofs
• Hot air and hot wedge roof welders
• For PVC and TPO roofing membranes

Nozzles, welding shoes, heating wedges, spare parts and consumables that equip Weldy heat guns, extruders and automatic welders for the job at hand.

• Nozzles, welding shoes and heating wedges
• Spare parts for Weldy tools
• Welding rods and seam testing equipment

A robust hot wedge welding machine for geomembrane seams in landfill, mining, water containment and aquaculture projects.

• Hot wedge welder for geomembranes
• Membranes from 0.8 to 2.5 mm
• Dual-track seam with test channel

Diamond saw blades for every class of cutting machine, specified by material and machine power for reinforced concrete, asphalt, masonry, stone, tiles and precast.

• Blades for hand-held, floor and wall saws
• Concrete, asphalt, stone and tile cutting
• Specified by machine power and material

Flat-end fixing sockets with a cross-hole, in six metric sizes for lightweight precast elements and wooden formwork.

• Thread sizes M8 to M24
• Crimped flat end with cross-hole
• SWL 200 to 1600 kg

Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.

• Single wire loop, 1770 MPa
• Sizes from 80 to 140 mm
• Pop-up loop, no re-bending

Polymer clip spacers that hold horizontal reinforcement at a defined concrete cover, specified to German Performance Class L2 (1 kN).

• Clip-fit support for horizontal rebar
• Cover sizes from 20 to 75 mm
• German performance class L2 (1 kN)

Polymer spacers that lift rooftop and patio tiles to a uniform height, so water drains and the waterproofing layer is protected.

• Raise tiles for drainage
• Protect waterproofing layers
• Heights of 13 and 19 mm

An SDS-plus dual-cutter hammer drill bit for concrete and reinforcement steel, with a patented drill head and a helix built to carry drilling dust out of the hole.

• Dual-cutter for concrete and rebar
• Twinmax 3D helix clears drilling dust
• Sizes from 4 to 26 mm

Chisels for SDS rotary hammers, in the shapes and sizes that demolition, chasing and refurbishment work in concrete, masonry and stone call for.

• SDS-plus and SDS-max chisels
• Types for demolition, chasing and tiles
• Tool steel chisels, can be reground

Zinc-coated steel single step with a 12 mm core and a 145 mm dowel distance.

• Zinc-coated steel single step
• 12 mm core, 0.800 kg
• Dowel distance 145 mm

Inverter electrofusion control unit with an actively cooled aluminium housing, intended for demanding large-diameter couplers.

• Inverter electrofusion control unit
• 8–48 V DC output
• Couplers up to 1200 mm and above

Automatic butt fusion machine for pipe from 450 to 800 mm, with a 0–16 MPa hydraulic range and an integrated 0.5 kW crane.

• Automatic butt fusion, 450–800 mm
• Pressure range 0–16 MPa
• Integrated crane, 1360 kg

A 2300 W electric pipe cutter for pipe from 75 to 400 mm, with variable speed and a tool-free blade lock.

• Cuts pipe 75 to 400 mm
• 2300 W, 0–2900 r/min
• One-click blade lock

A 3000 W hand extruder for PE and PP welding in civil engineering, tank fabrication and membrane work.

• Longer-body extruder for civil engineering
• Welds HDPE, LDPE, LLDPE and PP
• Overlap welding shoe included

A compact hot wedge welding machine for clean, consistent overlap seams in tarpaulins, banners, awnings and other thin membranes.

• Hot wedge welder for 0.1–1 mm membranes
• Tarpaulins, banners, awnings and covers
• 3.6 kg, up to 7.5 m/min