Samedia Diamond Blades for Asphalt and Abrasive Materials

Diamond blades made for concrete and building materials, in quality ranges from entry-level professional to forged high-end segments.

• Blades for concrete and masonry
• Forged SHOXX segments in top ranges
• For grinders, saws and wall saws

Diamond core bits for stand-mounted core drilling rigs, made for wet drilling in reinforced concrete, concrete and masonry.

• Core bits for mounted core rigs
• Wet drilling in reinforced concrete
• Speed guidance by material

Diamond cup wheels and surfacing tools for grinding concrete, screed, stone and coatings, from handheld grinders to floor grinding machines.

• Diamond cup wheels, 100 to 300 mm
• Tools for floors, screed and coatings
• Grinding pads and edge tools

Universal diamond blades for contractors who cut a mix of building materials on the same job, plus specialist blades for joints and wall chasing.

• Multi-material universal diamond blades
• Tuck-point blades for joints
• Blades for grinders and wall chasers

Diamond blades made for cutting granite and natural stone cleanly, with reduced-noise versions for quieter work.

• Blades for granite and natural stone
• Reduced-noise Silencio versions
• SHOXX and MASTER ranges

Purpose-made blades for materials and tasks that standard concrete and universal blades are not designed for.

• Blades for pipes, metal and glass
• Green concrete and screed blades
• Purpose-made for one material or task

Diamond blades made for cutting tiles and ceramics cleanly, with ranges from professional entry level to high-end SHOXX.

• Blades for tiles and ceramics
• Continuous-rim blades for clean cuts
• SHOXX, MASTER, TECHNIC and SOLID

Core bits for core drilling circular openings in construction and building work.

• Core bits for core drilling
• Cuts circular holes
• Selected by diameter and machine

Diamond saw blades for every class of cutting machine, specified by material and machine power for reinforced concrete, asphalt, masonry, stone, tiles and precast.

• Blades for hand-held, floor and wall saws
• Concrete, asphalt, stone and tile cutting
• Specified by machine power and material

Diamond wire for cutting, demolishing and dismantling concrete, reinforced concrete and steel structures, made to suit the cut and the wire saw.

• Diamond wire for concrete and steel
• CBC, CBM and CBE cable families
• Connections and crimping tools available

Belgian-made diamond core bits for every coring job, from heavily reinforced concrete on high-power rigs to dry drilling in masonry, tiles and electrical installations.

• Wet and dry diamond core bits
• Rocket Line, Score, Speedor and Falcor
• Segment profiles matched to drill power

The cutting elements of a segmented core bit, made in eight profiles so the crown can be matched to the concrete, the aggregate and the power of the core drill.

• Eight segment profiles for core bits
• Fast and long-life versions by drill power
• Brazed or laser-welded fixing

Diamond saw blades for every class of cutting machine, specified by material and machine power for reinforced concrete, asphalt, masonry, stone, tiles and precast.

• Blades for hand-held, floor and wall saws
• Concrete, asphalt, stone and tile cutting
• Specified by machine power and material

Flat-end fixing sockets with a cross-hole, in six metric sizes for lightweight precast elements and wooden formwork.

• Thread sizes M8 to M24
• Crimped flat end with cross-hole
• SWL 200 to 1600 kg

Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.

• Single wire loop, 1770 MPa
• Sizes from 80 to 140 mm
• Pop-up loop, no re-bending

Polymer clip spacers that hold horizontal reinforcement at a defined concrete cover, specified to German Performance Class L2 (1 kN).

• Clip-fit support for horizontal rebar
• Cover sizes from 20 to 75 mm
• German performance class L2 (1 kN)

Polymer spacers that lift rooftop and patio tiles to a uniform height, so water drains and the waterproofing layer is protected.

• Raise tiles for drainage
• Protect waterproofing layers
• Heights of 13 and 19 mm

An SDS-plus dual-cutter hammer drill bit for concrete and reinforcement steel, with a patented drill head and a helix built to carry drilling dust out of the hole.

• Dual-cutter for concrete and rebar
• Twinmax 3D helix clears drilling dust
• Sizes from 4 to 26 mm

Chisels for SDS rotary hammers, in the shapes and sizes that demolition, chasing and refurbishment work in concrete, masonry and stone call for.

• SDS-plus and SDS-max chisels
• Types for demolition, chasing and tiles
• Tool steel chisels, can be reground

Zinc-coated steel single step with a 12 mm core and a 145 mm dowel distance.

• Zinc-coated steel single step
• 12 mm core, 0.800 kg
• Dowel distance 145 mm

Inverter electrofusion control unit with an actively cooled aluminium housing, intended for demanding large-diameter couplers.

• Inverter electrofusion control unit
• 8–48 V DC output
• Couplers up to 1200 mm and above

Automatic butt fusion machine for pipe from 450 to 800 mm, with a 0–16 MPa hydraulic range and an integrated 0.5 kW crane.

• Automatic butt fusion, 450–800 mm
• Pressure range 0–16 MPa
• Integrated crane, 1360 kg

A 2300 W electric pipe cutter for pipe from 75 to 400 mm, with variable speed and a tool-free blade lock.

• Cuts pipe 75 to 400 mm
• 2300 W, 0–2900 r/min
• One-click blade lock

A 3000 W hand extruder for PE and PP welding in civil engineering, tank fabrication and membrane work.

• Longer-body extruder for civil engineering
• Welds HDPE, LDPE, LLDPE and PP
• Overlap welding shoe included

A compact hot wedge welding machine for clean, consistent overlap seams in tarpaulins, banners, awnings and other thin membranes.

• Hot wedge welder for 0.1–1 mm membranes
• Tarpaulins, banners, awnings and covers
• 3.6 kg, up to 7.5 m/min