Väli VPWS 75 (M) Manual Butt Fusion Welding Machine, 20–75 mm

A 2300 W electric pipe cutter for pipe from 75 to 400 mm, with variable speed and a tool-free blade lock.

• Cuts pipe 75 to 400 mm
• 2300 W, 0–2900 r/min
• One-click blade lock

Automatic butt fusion machine for very large pipe from 630 to 1000 mm, with a 17.5 kW heating plate and a 1 kW crane.

• Automatic butt fusion, 630–1000 mm
• 24.5 kW total power
• Heating plate rated 17.5 kW

Portable socket fusion welder for 75, 90 and 110 mm pipe, with PID temperature control.

• Socket fusion, 75–110 mm
• 1200 W socket fusion welder
• Two removable support stands

The largest Väli automatic butt fusion machine, welding pipe from 630 to 1200 mm on an aluminum frame with an integrated crane.

• Automatic butt fusion, 630–1200 mm
• 29 kW total power
• Aluminum frame, 2800 kg

Compact automatic butt fusion machine for small-to-medium pipe from 50 to 160 mm, on a 220 V supply.

• Automatic butt fusion, 50–160 mm
• 2.45 kW total power
• Plate deviation under ±5°C

Manual butt fusion machine with aluminum construction for pipe from 50 to 160 mm.

• Manual butt fusion, 50–160 mm
• Aluminum, 46 kg gross weight
• Plate up to 270°C

Handheld digital socket fusion welder for pipe from 75 to 160 mm, with PID temperature control and two support stands.

• Handheld socket fusion, 75–160 mm
• 1800 W, 230 V (60 Hz)
• PID microcontroller control

Manual butt fusion machine with aluminum construction for pipe from 63 to 200 mm.

• Manual butt fusion, 63–200 mm
• Aluminum, 66 kg gross weight
• Air cooling, 2.2 kW rated

Automatic butt fusion machine for pipe from 63 to 250 mm, designed in Germany and manufactured in the PRC.

• Automatic butt fusion, 63–250 mm
• 3.85 kW total power
• Heating plate rated 2 kW

Automatic butt fusion machine for mid-range pipe from 90 to 315 mm on a 220 V supply.

• Automatic butt fusion, 90–315 mm
• 4.85 kW total power
• Heating plate rated 3 kW

Automatic butt fusion machine for mid-to-large diameter pipe from 90 to 355 mm, with an electrohydraulic unit and a 220 V supply.

• Automatic butt fusion, 90–355 mm
• 5.85 kW total power
• Heating plate rated 4 kW

Three-phase automatic butt fusion machine for large pipe from 200 to 450 mm, with 0–8 MPa hydraulic pressure adjustment.

• Automatic butt fusion, 200–450 mm
• 8.38 kW, 380 V three-phase
• Heating plate rated 5.38 kW

Diamond saw blades for every class of cutting machine, specified by material and machine power for reinforced concrete, asphalt, masonry, stone, tiles and precast.

• Blades for hand-held, floor and wall saws
• Concrete, asphalt, stone and tile cutting
• Specified by machine power and material

Flat-end fixing sockets with a cross-hole, in six metric sizes for lightweight precast elements and wooden formwork.

• Thread sizes M8 to M24
• Crimped flat end with cross-hole
• SWL 200 to 1600 kg

Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.

• Single wire loop, 1770 MPa
• Sizes from 80 to 140 mm
• Pop-up loop, no re-bending

Polymer clip spacers that hold horizontal reinforcement at a defined concrete cover, specified to German Performance Class L2 (1 kN).

• Clip-fit support for horizontal rebar
• Cover sizes from 20 to 75 mm
• German performance class L2 (1 kN)

Polymer spacers that lift rooftop and patio tiles to a uniform height, so water drains and the waterproofing layer is protected.

• Raise tiles for drainage
• Protect waterproofing layers
• Heights of 13 and 19 mm

An SDS-plus dual-cutter hammer drill bit for concrete and reinforcement steel, with a patented drill head and a helix built to carry drilling dust out of the hole.

• Dual-cutter for concrete and rebar
• Twinmax 3D helix clears drilling dust
• Sizes from 4 to 26 mm

Chisels for SDS rotary hammers, in the shapes and sizes that demolition, chasing and refurbishment work in concrete, masonry and stone call for.

• SDS-plus and SDS-max chisels
• Types for demolition, chasing and tiles
• Tool steel chisels, can be reground

Zinc-coated steel single step with a 12 mm core and a 145 mm dowel distance.

• Zinc-coated steel single step
• 12 mm core, 0.800 kg
• Dowel distance 145 mm

Inverter electrofusion control unit with an actively cooled aluminium housing, intended for demanding large-diameter couplers.

• Inverter electrofusion control unit
• 8–48 V DC output
• Couplers up to 1200 mm and above

Automatic butt fusion machine for pipe from 450 to 800 mm, with a 0–16 MPa hydraulic range and an integrated 0.5 kW crane.

• Automatic butt fusion, 450–800 mm
• Pressure range 0–16 MPa
• Integrated crane, 1360 kg

A 2300 W electric pipe cutter for pipe from 75 to 400 mm, with variable speed and a tool-free blade lock.

• Cuts pipe 75 to 400 mm
• 2300 W, 0–2900 r/min
• One-click blade lock

A 3000 W hand extruder for PE and PP welding in civil engineering, tank fabrication and membrane work.

• Longer-body extruder for civil engineering
• Welds HDPE, LDPE, LLDPE and PP
• Overlap welding shoe included

A compact hot wedge welding machine for clean, consistent overlap seams in tarpaulins, banners, awnings and other thin membranes.

• Hot wedge welder for 0.1–1 mm membranes
• Tarpaulins, banners, awnings and covers
• 3.6 kg, up to 7.5 m/min