Mechanical expansion bolts for post-fixing in concrete, in seven sizes from M6 to M24.
- Sizes M6 to M24
- Mild steel, silver or zinc-plated
- Recommended tensile and shear loads
Brands we supply
Brand portfolio
G-Lift
G-Lift is an in-house brand of Global Source KSA, offering lifting, anchoring and connecting accessories for precast concrete and construction applications.
About G-Lift and its applications
The range covers the components used to cast, lift, form and connect precast concrete elements, together with a small number of general fixings.
Product Areas
- Lifting sockets and anchors: lifting sockets, fixing sockets, capstan anchors, two-hole anchors and spread anchors, cast into precast elements to provide lifting points.
- Lifting equipment: threaded lifting loops, Goliath lifting loops, lifting shackles and ring clutches, which connect to the cast-in anchors.
- Forming and shaping accessories: chamfers and rubber recess formers.
- Connecting and fastening components: connector pins, connecting loops, C-channels and T-bolts, and hex nuts for tie rods.
- Anchoring and pipe solutions: expansion bolts and corrugated pipes.
Applications
G-Lift accessories are used in:
- Precast concrete production: casting in lifting points, forming recesses and chamfered edges, and connecting wall panels.
- Lifting and handling: lifting, turning and placing precast panels, slabs, beams and pipes.
- Formwork and shuttering: tie-rod fastening, chamfer strips and recess forming.
- General construction: post-fixing with expansion bolts, cast-in channels for attachments and corrugated ducts.
Each G-Lift product page sets out the product codes, sizes and loads for that product. Load figures support product selection; the lifting design for each element remains the responsibility of the project engineer.
G-Lift Products from Global Source Middle East
Global Source Middle East supplies G-Lift lifting, anchoring and connecting accessories to precast producers, contractors and project engineers in the UAE.
Contact Global Source Middle East in Deira, Dubai, for pricing, availability and orders.
Explore the portfolio
7–12 of 17 products
Flat-end fixing sockets with a cross-hole, in six metric sizes for lightweight precast elements and wooden formwork.
- Thread sizes M8 to M24
- Crimped flat end with cross-hole
- SWL 200 to 1600 kg
Threaded lifting loops with a welded eye and retracted rope loop, in six Rd sizes from 1.2 to 8 tonne.
- Rd 16 to Rd 42 threads
- Load 1.2 to 8 tonne
- Welded eye, retracted rope loop
Hex nuts for steel tie rods in formwork and shuttering, for 15 mm and 20 mm bars.
- For 15 and 20 mm tie rods
- Five lengths, 50 to 130 mm
- Weights from 0.22 to 0.78 kg
Steel lifting shackles for ball-head and spherical-head anchors, in six load groups from 1.3 to 20 tonne.
- Six load groups, 1.3 to 20 tonne
- For spherical-head anchor systems
- Breakage safety factor of 5
Cast-in lifting sockets with a cross-hole for reinforcement bar and a plastic stopper that keeps concrete out of the thread.
- Rd 12 to Rd 52 thread sizes
- Cross-hole for reinforcement bar
- Safe Load 500 to 12,500 kg
Cast-in anchor channels with T-bolts for adjustable fixings that avoid drilling into hardened concrete.
- Five C-channel profile sizes
- T-bolts M10 to M20
- Cast-in, no on-site drilling
Spherical-head anchors for lifting precast slabs, beams, pipes and thin elements, in seven load groups.
- Spherical head, one-motion attachment
- Load groups 1.3 to 20 tonne
- Lengths from 85 to 250 mm
Plastic and steel chamfer strips for forming chamfered concrete edges and false joints, 5 to 30 mm.
- Plastic and steel chamfer strips
- Sizes 5 to 30 mm
- All strips 2 m long
Single wire loops that pop up after casting for wall-to-wall and wall-to-column connections in precast construction.
- Single wire loop, 1770 MPa
- Sizes from 80 to 140 mm
- Pop-up loop, no re-bending
High-strength steel connector pins for joining the layers of precast sandwich panels.
- For precast sandwich panels
- Four sizes, 150 to 250 mm
- High-strength steel pins
Galvanized steel corrugated pipes in diameters from 40 to 150 mm for post-tensioning ducts, voids and service penetrations.
- Galvanized steel, 40 to 150 mm
- Hot-dip galvanized coating
- Bendable, cuttable, semi-rigid
Reusable natural-rubber recess formers that create the pocket around a lifting anchor in precast formwork.
- Natural rubber, reusable
- Round and TPA shapes
- Matched to load groups
Heat-treated ring clutches with a T-slot for dogbone anchors, in five load groups from 1.2 to 26 tonne.
- Five load groups, 1.2 to 26 tonne
- T-slot engages dogbone anchors
- Manual locking bolt, no tools
Steel spread anchors for lifting precast slabs and panels, resisting both shear and tension loads.
- Seven sizes, 2.5 T to 10 T
- Resists shear and tension loads
- Plain, electro or hot-dip galvanized
Wire-rope lifting loops with an externally threaded steel ferrule, in ten RD thread sizes from 5 kN to 125 kN.
- Ten RD thread sizes
- Load 5 kN to 125 kN
- Externally threaded steel ferrule
Anchors for lifting thin or low-compressive-strength concrete panels, with two holes for an additional rebar or tension bar.
- Six sizes from 2.5 T to 22 T
- Two-hole design takes extra rebar
- For thin or low-strength panels
No products match your selection.
Try another product name or clear the filters to browse the full selection.
Plan your purchase
Discuss your requirements
Contact Global Source Middle East about G-Lift products or request a quotation for your requirements.